There are currently no product reviews.
Manual found fast and good quality, very helpfull service
8-17-12 Been using the sight for about 6 months. Fast Downloads and top quality
Everything was great, the manual, the response time, the simplicity of the order, and the
Price. The only thing that I could possible say on a negative note would be that the manual I ordered was more for a service tech. There were a lot of schematic diagrams that didn't help me solve the problem. However I would order again and recommend the web sight to others.
I'd been looking for this manual for awhile. Exactly what I needed - and at an excellant price. Thanks!
very complete. acceptable resolution. details are a little unclear. is a manual note 8.
1 August 1996
7.3 FUSING ENTRANCE GUIDE SHIFT MECHANISM
The entrance guide [A] for this machine has two holes on the rear side of the entrance guide to adjust for thick or thin paper. Normally, the upper screw hole [B] is used. For thin paper, move the entrance guide up by securing it with screw hole [C]. This slightly lengthens the paper path, which prevents the paper from creasing in the fusing unit. For thick paper, move the entrance guide down (use the lower screw hole). This is because the lower setting allows more direct access to the gap between the hot and pressure rollers. This prevents thick paper from buckling against the hot roller, which can cause blurring at the leading edge of the copy. Also, thick paper does not bend as easily, and is therefore less prone to creasing.