I PURHASED THIS PRODUCT BECAUSE I WAS HAVING PROBLEMS WITH MY CDR20 HARMAN KARDON RECORDER. WHICH I PURCHASED NEW 12 YEARS AGO. AFTER REVIEWING THE MANUAL, I WAS ABLE TO ADJUST THE TENSIONER IN THE SYSTEM. WORKS LIKE A CHAMP!.
SAVED ME AT LEAST 100.00 WHICH WAS WHAT A SERVICE REPAIR STATION WANTED. GREAT MANUAL EASY TO READ. SPECIALLY AFTER I PRINTED THE PAGES WHICH DEALT WITH MY RECORDER. THANKS A LOT!!!!!!!!
I have never bought a service manual which is as competely readable as this althogh it was a scanned pdf. Thank you for this succesful manual also cheaper than other sites.
Thanks for a very good and readable servicemanual. Just what I needed as a "dinosaur technician". I really recommmend this site and will come back.
Åsbjörn
Text excerpt from page 214 (click to view)
ADF/SCANNER SECTIONS
November 29, 1999
[C] [A]
[D] [B] [E]
H306R061.WMF
[F]
[G]
H306R062.WMF
3. Release the pawls of the second mirror cover [A] and SBU cover [B] and remove the covers. 4. Remove the xenon lamp cover [C] (4 screws). 5. Remove the clip [D] and slide out the lamp [E]. NOTE: The transparent part of the xenon lamp [F] must face to the scan line. To keep up the slack in the Xenon lamp harness [G], lead the harness to the left of the pawl under the connector and behind the pawl under the screw. This can prevent the harness from being caught between the optical unit and the ADF lower unit.