|
Who's Online
There currently are 5823 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
The Service Manual was just as expected, complete with schematics and I was able to download it in less than an hour after I ordered it. The only problem with these is that the schematics are hard to read due to the small font. I could remedy this by printing them on a larger printer.
;
Very fast, clear and usefull site !
Also this Service Manual are very well maked and with a very good definition !
Very fast download speed !
Recomended Seller !
;
The manual you sent me was excellent. It included clear, readable diagrams and a usable parts list. I would surely use your service again. Thanks
;
Payments were processed quickly and items were exactly as described. I will use owner-manuals.com in the future for any other manual needs.
;
The Technics manual was very clear and I was able to solve my technical problems.
I did not think that anyone kept these manuals and was pleasantly surprised to find them on the Internet and at an affordable price.
I would recommend Owner Manuals as a first source of technical products for ‘dated’ equipment manuals.
Ian
TROUBLESHOOTING COPY QUALITY TROUBLESHOOTING
May 29th, 1995
6.1.3. Dirty Background
H516T507.wmf
H516T512.wmf
Possible Cause (Scanner) � Scanner shading correction error or wrong threshold. Action: 1. Clean the shading plate. 2. Adjust the scanner contrast threshold settings. Possible Cause (Printer) � Poor drum sensitivity. � The charge is not properly applied. � The hot roller is dirty. Action: 1. Try replacing the drum. 2. Check if the hot roller surface is dirty or not. � If it is, clean the roller or replace the cleaning pad. � If not, go to step 3. 3. Check if all the charge bias terminals on the development unit and the CTM, and the charge wire are properly connected or not. � If they are, check or replace the power pack. � If not, fix the connections.
6-4
|
|
|
> |
|