I PURHASED THIS PRODUCT BECAUSE I WAS HAVING PROBLEMS WITH MY CDR20 HARMAN KARDON RECORDER. WHICH I PURCHASED NEW 12 YEARS AGO. AFTER REVIEWING THE MANUAL, I WAS ABLE TO ADJUST THE TENSIONER IN THE SYSTEM. WORKS LIKE A CHAMP!.
SAVED ME AT LEAST 100.00 WHICH WAS WHAT A SERVICE REPAIR STATION WANTED. GREAT MANUAL EASY TO READ. SPECIALLY AFTER I PRINTED THE PAGES WHICH DEALT WITH MY RECORDER. THANKS A LOT!!!!!!!!
The manual I purchased was just what I needed. I was glad to find a site where I can find so many manuals on a wide variety of products.
Text excerpt from page 78 (click to view)
INSTALLALING OPTIONAL UNITS
21 May, 1999
5. This step is required only for the USA model. Remove the handset bracket [J] from the top cover (2 screws). 6. Cut off the TEL2 cover [K]. 7. Thread the harness [L] through the opening in the counter bracket [M] and the TEL2 cover opening. Then attach the counter unit to the top cover (USA models: use the screws that were removed in step 5). 8. Secure the mechanical counter [N] to the bracket (1 screw). 9. Connect the counter harness [O] and place the connector into the recess under the PSU harness as shown. Then replace the top cover. 10. Plug in the machine and turn on the main switch. Make some copies and check whether the counter works. End of Procedure