Great manual...really saved me. The only problem is that I thought I would be able to download it directly when I paid for it but never received the download instructions until the next morning. The board trace pages were somewhat light also: really need to turn up the contrast on the printer before printing them. The schematic page was great; very clear! Well worth the money.
I've been in the electronic business for a long time. I used to buy Sam's Photofact for my needs which intailed having to go to the store and paying about $20 for a package of 3 different units so I was forced to buy more than I needed just to get one.
Owner manual is just at your keyboard and the information is almost instantansouly and the cost is very reasonable. Easy to print out if needed or simply read off of the screen. The larger the screen the better for obvious reasons.
Had everything I needed. Onyly took a few hours after paid for by PayPal. The copy was very readable.
Text excerpt from page 51 (click to view)
August 1, 1985
Lower Clamshell
(1) Front Cover (2 screws) 1. Open the clamshell to remove the
2. screws. Pull out the cassette holder to remove the front cover.
(5) Lower Left Cover (2 screws) 1. Remove the front cover (2 screws), the upper rear cover (2 screws), and lower rear cover (4 screws) to remove the lower left cover. (6) Exit Cover (2 screws)
NOTE: * When installing the front cover, be sure that the tabs engage with the positioning notches. (2) Manual Feed Guide 1. Open the clamshell. 2. Lift the manual feed guide and remove. (3) Lower Right Cover (2 screws) (4) Lower Rear Cover (4 screws) 1. Remove the upper rear cover (2 screws). 2. Open the clamshell and remove. NOTE: * Remember that one screw is longer than the other three screws. The longer screw prevents the upper paper feed guide plate from being turned over.