|
Who's Online
There currently are 5748 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
I bought the service-manual of the sony ICB-1020(an old transmitter-receiver) at "www.Owners-Manual.com", I found the service-manual for a fairly cheap price(in comparison with other sellers). I filled in some questions, payed the order with Ideal, and within 24 hours I had my service manual. I was very happy:In no time I had my service-manual and everything, but literally everything was noted down in the manual; the electronic scheme, the parts list, etcetera.
A very practical, reference-document.
;
This comprehesive service maual was greatly appreciated, as was the digital download.
;
Good en helpfull black and white scanned Srfvice manual of the Philps D8444. Quick service and delivery
;
Scan was really good quality, easy to read, download easy
;
very good manual as always. easy to read, detailed and includes schematic
DUPLEX UNIT
8 July 1996
[E]
[F]
[D]
[G]
A176R515.wmf
[A]
[I] [C]
[B]
A176R719.wmf
[H]
A176R700.wmf
NOTE: 1) Adjust the position of the stopper [A] so that the jogger fences [B] and side plate [C] are parrallel. 2) When installing the jogger fences, confirm if the two positioning pins [D] are correctly set in the two holes on the side fences after the screw is set. 3) When installing the positioning roller assembly, insert the plate [E] in the hole [F] on the rear frame, then set the plate on the lever [G]. 4) When installing the rear paper press mylar, set the hook [H] to the rear jogger fence [I] as shown so that the mylar moves together with the jogger fence [I]. 5) After installing the jogger fences, manually move the jogger fences [I] to confirm that they move smoothly. 6) After re-assembling the duplex unit, manually pull the plungers of the positioning roller solenoid and the pressure arm solenoid to confirm that the positioning roller assembly and the pressure arm move up and down correctly. 7) After re-assembling the duplex unit, adjust the jogger fence width so that the distance between both side fences become 1 mm wider than the paper size, when paper is set on the duplex tray. ( SP Adjustment - PAGE 10.)
5-116
|
|
|
> |
|